AMANYAR TF3 · Technology & Design
Seconds define success.
The smallest of margins can determine the difference between success and disappointment. Every watt of power matters when fighting against aerodynamic drag. The Amanyar TF3 has been designed to tackle this challenge head-on, with every aspect of its true one-piece moulded carbon frame carefully developed to reduce drag and maximise aerodynamic efficiency.
We have invested over two years in research and development, analysing airflow, refining tube profiles and exploring new approaches to frame design. Nothing has been left to appearance alone; every change in profile has a purpose.
The result is the Amanyar TF3, a frame that makes no apologies for its singular focus on speed, and where performance takes precedence over convention.
Shaped by Airflow
The aerodynamic development of the TF3 began with extensive Computational Fluid Dynamics (CFD) analysis, examining pressure distribution, turbulence and airflow separation around the frameset to identify areas of unnecessary drag.
Particular attention was given to the front forks, downtube and dropped seatstays. Through successive refinements to their leading edges, trailing edges and cross-sectional profiles, our design team worked to reduce airflow separation and the turbulent wake responsible for pressure drag.
One of the TF3’s most distinctive features is its exceptionally narrow 25 mm-wide downtube. This slim, elongated profile presents a smaller frontal area to oncoming air, helping to reduce drag at the high speeds encountered in time trial racing. Its carefully developed shape also takes into account the airflow generated by the front wheel and the changing wind angles experienced on the road.
While aerodynamics was the primary focus, the 25 mm-wide downtube also had to deliver the structural stiffness required for competitive racing, ensuring precise handling and efficient power transfer without compromising its narrow aerodynamic profile.
Consequently, the TF3’s distinctive shape is a direct result of this development process. Rather than allowing appearance to dictate design, every refinement has been made with aerodynamic performance and the demands of competitive racing in mind.
More Than Aerodynamics
Beyond its distinctive appearance, the frame’s external fork steerer and dropped seatstays play important roles in both aerodynamic performance and handling.
The external fork steerer takes a different approach to traditional front-end design, refining the relationship between the fork and head tube to reduce airflow disruption while maintaining precise steering response and stability at speed.
At the rear, the dropped seatstay configuration combines aerodynamic shaping with a carefully considered balance of lateral stiffness and vertical compliance. This helps maintain efficient power transfer while reducing road vibration and improving comfort during sustained efforts.
Together, these design features aim to deliver more than low aerodynamic drag alone, recognising that stability, comfort and the ability to maintain an effective riding position are equally important in competitive time trialling and triathlon.
The Strength of Continuous Carbon
True One-Piece Moulding (OPM) technology combines Japanese Toray T800 and M40 carbon fibres to create a continuous carbon structure rather than relying on separately manufactured frame sections bonded together.
By eliminating major bonded joints, OPM reduces potential stress concentrations and the need for additional reinforcement, while allowing greater control over carbon fibre placement and orientation.
This approach helps optimise structural strength, torsional stiffness and weight, particularly in high-load areas such as the bottom bracket, down tube and rear triangle.
The result is a stronger, more structurally consistent carbon frame, designed to withstand the demands of competitive racing while delivering responsive, efficient power transfer.
A Purpose-Built Aerodynamic Cockpit & Geometry
Available in four frame sizes, S, M, L and XL, the TF3 combines dedicated time trial geometry with a versatile, integrated cockpit, offering a wide range of rider positions and individual setups.
The low-drag handlebar profiles have been developed through CFD analysis, while adjustable extensions and forearm supports allow riders to fine-tune their position to balance aerodynamic efficiency, comfort, control and sustained power output for both time trial racing and triathlon, across different course requirements.
The Science Behind the Design
Throughout the development of the TF3, Computational Fluid Dynamics (CFD) simulations were used to analyse airflow, pressure distribution and aerodynamic drag across the frame and cockpit.
Testing at a simulated speed of 50 km/h identified areas of airflow separation around the fork, down tube and seatstays. Following multiple design modifications, the optimised TF3 frame achieved a 31.26% reduction in simulated aerodynamic drag, reducing the power required to overcome air resistance from 28.31 W to 19.46 W, a saving of 8.85 watts.
Individual tube-profile analysis recorded the following improvements:




| Frame section | Drag reduction | |
|---|---|---|
| Lower fork profile | 27.6% | |
| Upper fork profile | 21.5% | |
| Down tube profile | 54.3% | |
| Seatstay profile | 37.9% |
The cockpit was also included in the CFD development programme, with one optimised handlebar cross-section demonstrating a 55.2% reduction in simulated drag.

All figures are from CFD simulations conducted at 50 km/h. The frame comparison excludes the rider, wheels and accessories. Individual tube-profile percentages represent local cross-sectional improvements rather than reductions in overall drag.
Ownership
Approved. Personalised. Guaranteed.
UCI Approved — Ready to Race
With UCI approval for competitive time trial racing and a design intended to comply with the relevant European EN safety standards, the TF3 gives riders confidence in its safety, quality and suitability for competition. UCI approval confirms the frameset’s eligibility for use in UCI-regulated events, subject to the complete bicycle and rider position meeting the applicable regulations.
Custom Paint — Make It Your Own
Available in seven standard designs, the TF3 can also be personalised through Elves’ complimentary custom paint service. Working with our design team, you can choose your own colours and finishes to create an Amanyar TF3 that is uniquely yours, at no additional cost.
Five-Year Frame and Fork Warranty
Every Elves Amanyar TF3 comes with Elves’ five-year frame and fork warranty, giving riders long-term confidence in their purchase. Our global teams are also available to provide advice on frame sizing, component compatibility and after-sales support throughout your ownership.


























































































